Turbidity meter: Difference between revisions
Appearance
imported>Shreyasi Created page with "Making turbidity meter with Tasneem ." |
imported>Shreyasi No edit summary |
||
| Line 1: | Line 1: | ||
With Tasneem we made a simple turbidity meter using an LDR and laser. | |||
[[File:Turbidity 1.jpg|750px]] | |||
Materials needed - | |||
1. LDR | |||
2. Laser Pointer | |||
3. 33k Resistor | |||
3. Dark tube/Box (We used a black pvc pipe) | |||
4. Arduino + usb cable | |||
5. Wires | |||
6. test tubes | |||
Tools - | |||
1. Soldering Iron + Solder | |||
2. Glue Gun | |||
3. wire cutter/stripper | |||
1. Connect one leg of the LDR ground on the arduino . The other leg of the LDR will go to analog input 0 (Any of the analog inputs can be used. | |||
2. Connect one leg of the resistor to +5V on the arduino. The other leg of the resistor will go to the same analog input as the LDR (A0 in this case). This forms a [https://en.wikipedia.org/wiki/Voltage_divider| potential divider.] | |||
Revision as of 11:44, 30 March 2016
With Tasneem we made a simple turbidity meter using an LDR and laser.
Materials needed -
1. LDR 2. Laser Pointer 3. 33k Resistor 3. Dark tube/Box (We used a black pvc pipe) 4. Arduino + usb cable 5. Wires 6. test tubes
Tools - 1. Soldering Iron + Solder 2. Glue Gun 3. wire cutter/stripper
1. Connect one leg of the LDR ground on the arduino . The other leg of the LDR will go to analog input 0 (Any of the analog inputs can be used.
2. Connect one leg of the resistor to +5V on the arduino. The other leg of the resistor will go to the same analog input as the LDR (A0 in this case). This forms a potential divider.