Jump to content

Susmita: Difference between revisions

From (art)scienceblr
imported>Bsuvansh
No edit summary
imported>Bsuvansh
No edit summary
Line 5: Line 5:


- SD card
- SD card
Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.





Revision as of 08:42, 13 October 2017

The 3D printer which is available in Srishti Old Campus is a FABX The printer has two sources by which you can give it the command to print the object that are the

- USB 2.0 A/B and

- SD card

Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.


Software

-Cura 2.7.0

-Cura 15.04.6

-SketchUp

-Repetier-Host Mac

-Slic3r


About the 3D printer

SOFTWARE SETTINGS FOR CURA



Print speed 20-40mm/s

Single extruder

Filament Diameter 1.75mm

Built platform 100mm * 100mm * 100mm

Nozzle Diameter 0.4mm

Nozzle temperature 210 degrees

bed temperature 70-50 degrees