Susmita: Difference between revisions
Appearance
imported>Bsuvansh No edit summary |
imported>Bsuvansh No edit summary |
||
| Line 1: | Line 1: | ||
3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx | |||
Softwares used | |||
-Cura 2.7.0 | |||
-Cura 15.04.6 | |||
-SketchUp | |||
-Repetier-Host Mac | |||
-Slic3r | |||
About the 3D printer | |||
Print speed 20-40mm/s | |||
Single extruder | |||
Filament Diameter 1.75mm | |||
Built platform 100mm * 100mm * 100mm | |||
Nozzle Diameter 0.4mm | |||
Nozzle temperature 210 degrees | |||
bed temperature 70-50 degrees | |||
Revision as of 05:00, 13 October 2017
3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx Softwares used -Cura 2.7.0 -Cura 15.04.6 -SketchUp -Repetier-Host Mac -Slic3r
About the 3D printer
Print speed 20-40mm/s
Single extruder
Filament Diameter 1.75mm
Built platform 100mm * 100mm * 100mm
Nozzle Diameter 0.4mm
Nozzle temperature 210 degrees
bed temperature 70-50 degrees