Jump to content

Turbidity meter: Difference between revisions

From (art)scienceblr
imported>Shreyasi
Created page with "Making turbidity meter with Tasneem ."
 
imported>Shreyasi
No edit summary
Line 1: Line 1:
Making turbidity meter with Tasneem .
With Tasneem we made a simple turbidity meter using an LDR and laser.
 
[[File:Turbidity 1.jpg|750px]]
 
Materials needed -
 
1. LDR
2. Laser Pointer
3. 33k Resistor
3. Dark tube/Box (We used a black pvc pipe)
4. Arduino + usb cable
5. Wires
6. test tubes
 
Tools -
1. Soldering Iron + Solder
2. Glue Gun
3. wire cutter/stripper 
 
 
1. Connect one leg of the LDR ground on the arduino . The other leg of the LDR will go to analog input 0 (Any of the analog inputs can be used.
2. Connect one leg of the resistor to +5V on the arduino. The other leg of the resistor will go to the same analog input as the LDR (A0 in this case). This forms a [https://en.wikipedia.org/wiki/Voltage_divider| potential divider.]

Revision as of 11:44, 30 March 2016

With Tasneem we made a simple turbidity meter using an LDR and laser.

Materials needed -

1. LDR 2. Laser Pointer 3. 33k Resistor 3. Dark tube/Box (We used a black pvc pipe) 4. Arduino + usb cable 5. Wires 6. test tubes

Tools - 1. Soldering Iron + Solder 2. Glue Gun 3. wire cutter/stripper


1. Connect one leg of the LDR ground on the arduino . The other leg of the LDR will go to analog input 0 (Any of the analog inputs can be used. 2. Connect one leg of the resistor to +5V on the arduino. The other leg of the resistor will go to the same analog input as the LDR (A0 in this case). This forms a potential divider.