Jump to content

Susmita: Difference between revisions

From (art)scienceblr
imported>Bsuvansh
No edit summary
imported>Admin
No edit summary
 
(19 intermediate revisions by one other user not shown)
Line 1: Line 1:
The 3D printer which is available in Srishti Old Campus is a [http://www.3dig.in FABX]
The ''3D printer'' which is available in Art Science BLR is a '''[https://www.3ding.in/3dprinters/fabx-pro FabX]'''
The printer has two sources by which you can give it the command to print the object that are the
The printer has two sources by which you can give it the command to print the object that are the


Line 6: Line 6:
- SD card
- SD card


Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.  
Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.


Once you are done designing the model in any of the 3D modelling softwares such as Sketchup, Blender, Maya, Catia, AutoCAD, Fusion 360 etc etc. Then you need to export the file as STL format.
One pointer - sketchup can export the .skp file in .stl format using ht following [https://extensions.sketchup.com/en/content/sketchup-stl PLUGIN]
For the above 3D printer you can use '''[https://ultimaker.com/en/products/cura-software/list Cura] version 15.04.6.'''


Software


-Cura 2.7.0


-Cura 15.04.6
== '''Settings for Cura version 15.04.6''' ==


-SketchUp
'''''In the basic tab'''''
print speed (mm/s) = 50


-Repetier-Host Mac
Bed Size  150mm * 150mm * 150mm


-Slic3r
Printing temperature (C) = 210


Filament diameter depends on the filament that you will be using


About the 3D printer
Nozzle size (mm) = 0.4


'''
Material = PLA
SOFTWARE SETTINGS FOR CURA'''


Layer Height = 0.1mm


Shell Thickness = 0.8mm


Enable Retraction = activate


Print speed 20-40mm/s
Fill settings


Single extruder
Bottom/top thickness = 0.6 mm


Filament Diameter 1.75mm
Fill Density percentage = 20


Built platform 100mm * 100mm * 100mm
Speed = mm/s = 40


Nozzle Diameter 0.4mm
Print Temp = 210C


Nozzle temperature 210 degrees
Bed Temp = 70C


bed temperature 70-50 degrees
Support
 
Support Type = none
 
Platform Adehsion type = BRIM
 
Filament
 
Diameter = 1.75mm
 
Flow Percentage = 100
 
Machine
 
Nozzle size = 0.4 mm
 
 
 
 
'''''In the Advanced'''''
 
Speed = you will have to experiment with the speed and the temperature of the bed and temperature of the nozzle in order to get the desired print. Faster the speed less the quality of the print.
 
You might have to adjust the height of the bed, [http://www.instructables.com/id/Calibrating-your-3D-printer-using-minimal-filament/ click here] to know how to calibrate 3D printer
 
Written by [https://suvanshbohra.com/ Suvansh Bohra]

Latest revision as of 06:37, 6 November 2017

The 3D printer which is available in Art Science BLR is a FabX The printer has two sources by which you can give it the command to print the object that are the

- USB 2.0 A/B and

- SD card

Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.

Once you are done designing the model in any of the 3D modelling softwares such as Sketchup, Blender, Maya, Catia, AutoCAD, Fusion 360 etc etc. Then you need to export the file as STL format. One pointer - sketchup can export the .skp file in .stl format using ht following PLUGIN For the above 3D printer you can use Cura version 15.04.6.


Settings for Cura version 15.04.6

In the basic tab

print speed (mm/s) = 50

Bed Size 150mm * 150mm * 150mm

Printing temperature (C) = 210

Filament diameter depends on the filament that you will be using

Nozzle size (mm) = 0.4

Material = PLA

Layer Height = 0.1mm

Shell Thickness = 0.8mm

Enable Retraction = activate

Fill settings

Bottom/top thickness = 0.6 mm

Fill Density percentage = 20

Speed = mm/s = 40

Print Temp = 210C

Bed Temp = 70C

Support

Support Type = none

Platform Adehsion type = BRIM

Filament

Diameter = 1.75mm

Flow Percentage = 100

Machine

Nozzle size = 0.4 mm



In the Advanced

Speed = you will have to experiment with the speed and the temperature of the bed and temperature of the nozzle in order to get the desired print. Faster the speed less the quality of the print.

You might have to adjust the height of the bed, click here to know how to calibrate 3D printer

Written by Suvansh Bohra